Dalian extrusion molding adds granular or powdery solid materials into the hopper of the extruder. There is a heater outside the barrel of the extruder. The heat generated by the heater is transmitted to the materials in the barrel through heat conduction, and the temperature rises to reach the melting temperature. When the machine is running, the screw in the barrel rotates.

The material is transported forward. In the process of movement, the material rubs and shears with the barrel, screw and material, resulting in a large amount of heat. Combined with heat conduction, the material of Jiake is continuously melted, and the molten material is continuously and stably transported to the machine head (or die) with a certain shape.

耀彩网Under the action of screw rotation, it is transported forward to the feeding section through the friction and shear action of the inner wall of the barrel and the screw surface, where the loose solid is transported forward and compacted at the same time; In the compression section, the depth of the screw groove becomes shallower and further compacted. At the same time, heating outside the barrel and friction and shear between the screw and the inner wall of the barrel, the material temperature rises and begins to melt, and the compression section ends.

耀彩网The homogenization section makes the material uniform, extrudes the melt at constant temperature, constant quantity and constant pressure, forms after reaching the machine head, and obtains the product after setting. If it is found that the raw materials of the same brand are not dried well, the die head must be cleaned after re drying and extrusion. After refuelling, if the extrudate is found to be unsmooth, unstable and easy to break, the die shall be disassembled and cleaned.